对Bt毒蛋白不同抗性水平棉铃虫品系的生物学研究

用对Bt毒蛋白(Cry1Ac)具有一定抗性水平的安阳品系和相对敏感的新疆品系棉铃虫进行Bt毒蛋白(Cry1Ac)的室内毒力测定结果表明,两品系的LC50值分别为8.7645g·L 1和0.2547g·L 1,前者是后者的34.4倍。用转Bt基因抗虫棉中棉所29和常规棉花品种中棉所35蕾期的倒3叶饲养安阳品系和新疆品系棉铃虫的初孵幼虫(孵化后24h),结果表明:两个棉铃虫品系在取食抗虫棉后的累计校正死亡率在1～2d内差异不明显;新疆品系棉铃虫在转Bt基因抗虫棉上发育的最高龄期为4龄,其比率为6.7%;而安阳品系部分棉铃虫能够在转Bt基因抗虫棉上完成生长发育,其4龄幼虫的比率为45.5%,5、6龄幼虫的比率分别为12.6%和3.8%,有1.6%的幼虫能够正常化蛹;用常规棉棉叶饲养的安阳品系和新疆品系棉铃虫各龄幼虫的发育历期差异不显著,而用转Bt基因抗虫棉棉叶饲养的安阳品系棉铃虫幼虫的发育历期与新疆品系虽然差异不显著,但前者的发育历期均短于后者。     

抗草甘膦棉花研究进展

抗草甘膦棉花最早于1997在美国释放,它是通过将编码抗草甘膦酶5-烯醇式丙酮酰莽草酸-3-磷酸合成酶基因导入珂字棉312而获得的抗性株.抗草甘膦棉花在美国的种植面积占棉花总种植面积从1997年的3.2%到增加到2005年的60%左右.在这近十年内,抗草甘膦棉花虽然得到了广泛的种植,但也存在着不少问题,其中最为突出的是草甘膦的施用方法和时期的不正确操作对抗草甘膦棉花的根系生长、育性和产量都产生了负面影响.这主要是因为:1、外界因素,包括草甘膦施用方法在内的其他栽培措施和不利的环境条件,如高温,对抗草甘膦棉花的产量及生长的影响;2、内部因素,抗草甘膦棉花不同器官对草甘膦的吸收量及抗草甘膦基因的表达量差异有关.因此,本文从抗草甘膦棉花对草甘膦的吸收分配、草甘膦的施用量和时期对抗草甘膦棉花根系生长、花药开裂及产量等方面综述了这些年来抗草甘膦棉花在应用过程中的问题,并且对今后抗草甘膦棉花育种方面作了展望.     

氮素营养水平对小麦后移栽棉氮代谢的影响

对不同氮素营养水平下的小麦后移栽棉叶片硝酸还原酶活性、棉株含氮量及叶片氨基酸含量等进行了测定。结果表明，除８月１９日外，叶片硝酸还原酶活性与施氮量呈极显著正相关（ｒ＝０．９６９３～０．９８８１）；地上部各器官的含氮率和绝对含氮量均随施氮量的增加而提高，且不同器官间呈同步增减的趋势，因而氮素分配比例的变化不大；提高氮素营养水平可显著增加小麦后移栽棉的叶片氨基酸总量和游离氨的含量（ｒ＝０．５３１６和０．５６０５），在１７种氨基酸中，谷氨酸、脯氨酸等７种氨基酸的含量与施氮量呈显著的正相关（ｒ＝０．５２５６～０．６０７４）。虽然施氮量越高，棉株的氮素代谢越旺盛，但小麦后移栽棉的适宜施氮量约为２０５ｋｇ／ｈｍ２。     

陆地棉品种间杂种苏杂16棉铃发育动态研究

棉铃发育过程中，苏杂１６单铃子棉主的提高表现为二个方面：一是纤维干重的增加，１９９１～１９９２两年平均增加１０．０％；二是种子重量的提高，两年平均单铃种仁重增加９．４％。单铃纤维干重的增长与棉铃对位叶大小呈正相关关系，与棉铃对位叶中全Ｎ含量呈负相关关系．该杂文组合在棉铃发育过程中表现了较强的“源”“库”生理优势，光合产物积累多，营养物质运转快是该组合获得高产的重要生理基础。     

棉花分子育种研究进展

本文主要综述了我国近２０年来棉花分子育种在理论基础、技术方法、育种机理以及新品种培育等方面研究取得的成就及新进展，并讨论了棉花分子育种的发展方向     

Operational Deflection Shape Analysis of Large Scale Electromechanical System

Operational Deflection Shapes of large scale electromechanical system can be ex-tracted directly from multipoints response of the operating system by using of the modal shape analy-sis method. Thev can be used for engineers evaluating the practical dynamic beavior of the largescale elecltromechanical system,checking the existence of local reso,iance of the Stibsystem. and in-dentifying the wcakened positions of the rigidity of structure, In this paper the method of measuringand extracting the operational deflection shal1e of the electromecha nical system is given and theavailability of operational deflection shape is proved by analyzing the actual vibration of a large ex-haust fan system as an example.     

A NEW METHOD BY USING MASS AND ACCELERATION PARAMETERS FOR BALANCING INERTIAL FORCE OF MECHANISM

This paper presents a new method by using mass and acceleration parameters for balancing inertial force of mechanism. Compared with other balance methods, this one is simple, clear and superior in regularity when the balancing equation of complex mechanism is established, and its solving procedure is also easy. The new methcd is convenient to learn and use as well as convenient to program.     

Design for Precision Measurement System Based on Machine Vision

It is difficult to measure the geometric quantity of small parts in finishing, assembling and measuring, because it's easy to break the workpieces' surface and alter their position by means of traditional contact measuring methods.There are some non contact measurers, such as,light feeler pin and interference microscope etc., because of it's high price and strict working conditions,so it's difficult to promote them in widely use. Precision measurement system based on machine vision has the advantages of non contact measuring as well as high performance and low price. Some problems, such as light source, algorithm of edge fitting, auto focusing,are discussed.